[Kalimero]

0			0

Hello,

I am very surprised !!
Did you made the test ?

I tried to put the 28 nozzle (the one with 2 holes) on my 115,
The pitch is good, I can screw it, but then, I can't use my reflector !!

Because the external diameters of you 28 and 14 nozzles are bigger
than the external diameter of your 10 nozzle.

So I can't screw the central nut witch fixed the reflector
because it's internal diameter is smaller than the external diameter of the 28 nozzle !!

What I imagine to solve this problem
is an adaptator based on a 10 nozzle without any ceramic inside,
but a pitch so that I can screw the 28 nozzle in this adaptator.

Then I can first fixed my reflector with the central nut,
and after, the both adaptator-28nozzle.

I estimate that the price of such an adaptator
would not be more important than a 10 nozzle
(5 euro by 10 pieces)
what do you think so ?

Just for your information,
it is not so easy for us to make English pitch,
in France, we can easily make European pitch,
that's why we would like you to do them.

Thanks

Your faithfully

Eric BACHMANN

the pitch = le pas de vis
-----------------------------------------

Dear Mr. XXXXXXXX,

Yes, you are right a adapter is needed.
We have to make it specially for you.
Cost of the same is EURO 5 for 10 pcs.
Minimum quantity must 10 pcs.

Erratum:
With regards.

Yours faithfully,
for J.K.Dey & Sons
S. K. Dey
Partner